White cement-based patination putty, composed of hydrated lime, high-quality sand, special synthetic resins and specific additives. It is characterized by excellent workability, very good opening on both horizontal and vertical surfaces. Application up to 3 mm thick is allowed. After rubbing with sandpaper, it gives a smooth finish.
PINTOFINISH
It is used for filling walls, ceilings on gypsum cardboard surfaces, fillers and plaster, for interior environments which will later be covered with paint, wallpaper or decorative coatings. The patination putty should be applied at temperatures from +5°C to +35°C.
The base must be clean without dust, oils, paints or residues that become an obstacle to the connection between the layers. The base is cleaned mechanically or manually. If the support has large unevenness, then it must be leveled.
Application
Mix 5-5.5 liters of water with a 15 kg bag of product with an electric mixer at low speed, until a homogeneous mass is achieved and free of lumps. Leave the product to stand for 5 min and mix again before use. Apply the product with a stainless steel trowel and level it, to a thickness of 3 mm. Atmospheric conditions affect the drying time of the product.
Technical Data Sheet
Appearance: DUST
Packaging: 15 kg paper bag on 1080 kg pallet
Color:White
Granulation: < 0.1 mm
Consumption:1.2-1.5 kg/m²
Application thickness:3mm
How to apply:2 hands
Waiting time for the second hand:1 hour
Storage:Store in dry places on wooden pallets.
Storage time: 12 months from date of manufacture
Volumetric mass (dry): 1.5 g/m³
Water for mixing:5.5-6 liters of water per bag
Application temperature:+5°C to +35°C
Compressive strength:≥ 1.6 N/mm²
pH:13
Water absorption:WO
Reaction to fire:A1 Class
English 
Albanian 
Italian 
German 
Arabic