Gypsum-based plaster for manual and machine application. PREGIPS is a pre-prepared, lightweight mortar containing quality aggregates and specific additives.
PREGIPS
PREGIPS is ideally suited to porous concrete surfaces, walls built with various porous or normal brick materials. For creating smooth, easily structurable surfaces on walls and ceilings for interior spaces. Single-layer plaster for all surfaces, concrete as well as previously plastered load-bearing surfaces. It is used in all areas, from the roof to the basement with normal air humidity, including kitchens and bathrooms. It can be used as a surface for further processing with paint or wallpaper, for tiling, or for applying decorative plaster.
The base must be clean without dust, oils, paints or residues that become an obstacle to the connection between the layers. The base is cleaned mechanically or manually. If the support has large unevenness, then it must be leveled.
application
Mix 5-5.5 liters of water with a 15 kg bag of product with an electric mixer at low speed, until a homogeneous mass is achieved and free of lumps. Leave the product to stand for 5 min and mix again before use. Apply the product with a stainless steel trowel and level it, to a thickness of 3 mm. Atmospheric conditions affect the drying time of the product.
Technical Data Sheet
Appearance: DUST
Packaging: 25 kg paper bag on 1350 kg pallet
Color: White
Consumption: 3 m2/bag/10 mm thickness
Storage: Store in dry places on wooden pallets.
Storage time: 12 months from date of manufacture
Minimum application thickness for walls: 10 mm
Reaction to fire: Class A1
Working time: 1-2 hours
Minimum application thickness for ceilings: 8 mm
Density of dry mortar: 0.95 g/cm3
Application temperature: +50C to +350C
Material application: By hand or machine, 1 hand
Compressive strength after 28 days: ≥ 2.5N/mm²
Thermal conductivity: 0.34 W/mK
English 
Albanian 
Italian 
German 
Arabic