Reinforced adhesive and leveling compound for thermal insulation boards, EPS, for facades and ceilings. It has very good workability and high resistance to moisture. Maximum layer thickness for leveling up to 4 mm and for bonding up to 30 mm.
THERMOFIX 2N1
For bonding and leveling all types of thermal insulation boards, for facade and facade cladding. For bonding panels on brick (red) walls, thermal bricks, mixed walls or stone walls, concrete, on new and old plaster. Realization of thermal insulation systems. Also suitable for reinforcing mineral bases for subsequent decorative coatings.
The base must be clean, free of dust, oils or residues that could hinder the bonding between the layers. The base is cleaned mechanically or manually. For unstable bases, it is necessary to install fixing pins. The working time of the mixture is 2-3 hours, under normal temperature conditions (20°C).
Mix 6-6.5 liters of water with TERMOFIX in a clean container with an electric mixer until a homogeneous and lump-free mass is achieved. Apply the product with a screed on the insulating board to a thickness of 30 mm, covering approximately 45% of the board with adhesive using the ball and strip method. Before leveling the surface with a trowel, place the fixing pins depending on the board to be laid, 5-6 pins/m2.
FOR LEVELING
Apply the product with a trowel on the insulation board in a thickness of 4 mm. While still fresh, apply the reinforcing mesh so that it is immersed in the adhesive. In corners or at the joints of doors or windows, it is necessary to apply the reinforcing mesh twice. The optimal working temperatures are from 50C to 350C. For subsequent coatings, it is important that the base has reached the drying maturity of about 5-7 days, depending on atmospheric conditions.
Technical Data Sheet
Appearance: DUST
Packaging: 25 kg paper bag on 1350kg pallet
Color: White, Gray
Granulation: 0.7 mm
Consumption as adhesive: 4-5 kg/m²
Consumption as a leveling agent: 2-3 kg/m²
Storage: Store in dry places on wooden pallets.
Storage Time: 12 months from date of manufacture
Volumetric Measure: 1.65-1.75 g/cm³
Water for mixing: 6-6.5 liters of water per 25 kg
pH of the mixture: >12
Compressive strength: 10N/mm2
Application temperature: +5°C to +35°C
Waiting time for paint: 7 days
Coefficient of thermal conductivity (λ 10,dry): 0.43 W/Mk
Bond strength in concrete after 28 days: 1.4 N/mm2
Adhesive strength on EPS: 131 kPa
Water absorption: W2
Reaction to fire: Class A1
English 
Albanian 
Italian 
German 
Arabic