Two-component waterproofing material with high flexibility based on cement, selected aggregates with fine sand with specific additives and flexible polymer. It has good workability and thanks to the organic resins it contains it has very good adhesion capabilities on all types of bases (always stable and clean) on concrete and walls, creating a flexible and impermeable layer. For outdoor and indoor environments.
HYDROFIX II
Very good adhesion properties on all types of bases. Flexible and waterproofing protection for bathrooms, showers, balconies, basements, terraces and swimming pools. Waterproofing before laying ceramic tiles, for plaster, floors, concrete surfaces, suitable for repairs on prefabricated structures. Protector of concrete surfaces against the effects of constant humidity, chlorides, sulfates, etc.
Pour the liquid component B (8KG) into a clean container and while mixing add the dry component A (25KG). Mix with a mechanical mixer until a homogeneous mass is achieved, without lumps and without air bubbles. The working time of the mixture is 2-3 hours.
Cement-based substrates must be stable, resistant and regular, free of oil, dirt and paint residues and must have reached the required curing time. Approximately traditional cement-based floors with normal hardening time must have a curing time of at least 28 days, traditional plaster bases must dry for at least 14 days. Large unevenness or large cracks must be repaired in advance. All types of substrates must be mechanically cleaned before applying the product. A 10 cm waterproofing strip must be placed in all corners between the wall and the floor, technical joints and drainage joints.
application
Apply the product in two coats with a brush, roller or spatula, applying about 2mm for each coat, placing a fiberglass mesh on the wet product in the first coat. The second coat is applied after a period of 4-6 hours between each coat and not before the first coat has dried. The product is used only by combining component A with component B and in the recommended quantity. Apply the product at temperatures from +5°C to +35°C.
Technical Data Sheet
View A: DUST
Packaging A: 25 kg paper bag in 1350 kg pallet
Color A: gray
Consumption A: 1.65 kg/mm thickness
Storage A: Store in dry places on wooden pallets.
Storage Time A: 12 months from date of manufacture
pH of mixture A: >12
Volumetric Measure A: 1.6-1.7 g/cm³
Thickness for layer A: 1-2 mm (per hand)
Application temperature A: +5°C to +35°C
Granulation A: 0.7mm
Adhesion to concrete (28 days) A: ≥0.6 N/mm2
Water permeability A: 0.15 kg/m2. h0.5
Adhesive strength after heat treatment A: ≥0.8 N/mm²
Thickness for layer A:
2mm/per hand
Reaction to fire A: Class A1
View B: juice
Packaging B: 8 Kg Can
Color B: White
Storage B 24 months
Volumetric Measure B: 1.1 g/cm3
Caution! Do not mix any other product with Hidrofix II and to apply the second coat you must ensure that the first coat is completely dry. Empty cans should not be used for drinking water. Do not apply on bituminous waterproofing. Avoid application on hot or windy days, on frosty and thawing substrates. Make sure the substrate is completely dry to perform tiling or painting.
English 
Albanian 
Italian 
German 
Arabic