White cement-based patination putty, composed of hydrated lime, high-quality marble sand, special synthetic resins and specific additives. Reinforced with fibers. Characterized by excellent workability, very good opening on both horizontal and vertical surfaces. Application up to 3 mm thick is allowed. After rubbing with sandpaper, it gives a smooth finish.
ULTRAFINISH
It is used for filling walls and ceilings on concrete, gypsum board and plaster surfaces, for both indoor and outdoor environments. The patination putty should be applied at temperatures from +5°C to +35°C.
The base must be clean without dust, oils, paints or residues that become an obstacle to the connection between the layers. The base is cleaned mechanically or manually. If the support has large unevenness, then it must be leveled. Before application, the support is wetted with water.
Application
Mix 5.5-6 liters of water with a 15 kg bag of product with an electric mixer at low speed, until a homogeneous mass is achieved and free of lumps. Leave the product to stand for 5 min and mix again before use. Apply the product with a stainless steel trowel and level it, to a thickness of 3 mm. Atmospheric conditions affect the drying time of the product.
Technical Data Sheet
Appearance: DUST
Packaging: 15 kg paper bag on 1080 kg pallet
Color:White
Consumption:1.2-1.5 kg/m2 (3mm thickness)
Storage:On wooden pallets
Thermal conductivity:0.36 λ 10, dry
How to apply:2 hands
Storage:12 months from date of manufacture
Volumetric Measure:1.15g/cm3
Amount of water:5.5-6 liters of water per 25 kg of product
Thickness:1-2 mm/hand
Paint application:2 days
pH of the mixture:13
Granulometry:0.1 mm
Application temperature:+5°C to +35°C
Compressive strength: 4.2 N/mm²
Water absorption:WO
Reaction to fire:A1 Class
English 
Albanian 
Italian 
German 
Arabic