Fuga Pro is a high-performance, non-irritating cement-based product (C) for grouting joints (G), with improved adhesive strength (2), low water absorption (W) and abrasion resistance. The product is composed of innovative resins and raw materials, crystalline silica, perlite-based filler and inorganic pigments.
PRO FUGA
It is used for exterior and interior environments, for floors and walls, central heating, terraces, balconies, swimming pools, fountains. Fuga Pro is used for filling gaps from 2 to 8 mm for ceramic tiles, porcelain, mosaic tiles, stone tiles, marble, granite, etc.
Creates compact, smooth and complete surfaces. Works in a short time and is easy to wash Excellent workability Does not transmit water Resistant to mold and bacteria Resistant to abrasion Against efflorescence Stable and uniform colors.
We apply Fuga Pro using a rubber trowel. The joints are filled by making diagonal movements of the rubber and removing the excess product from the tile. When the product has reached the appropriate drying time (after 15-30 minutes), the surface of the joints is cleaned and finished using a damp, well-wrung sponge. If the joint is cleaned too quickly when the product is still wet, there is a possibility that it will lose its color after hardening.
Before use, ensure that the surface is clean, stable, dry and treated, leveled and flat. The mechanical strength of the support where the product is applied must be acceptable. We must control the ambient temperature, humidity and other conditions during the application. We ensure that the support where Fuga Pro is applied (tile adhesive, self-leveling, waterproofing products) must be mature. The joints must be clean, free of dust and have the appropriate depth for filling. If we fill joints on highly absorbent tiles and in the presence of warm weather conditions, we must use a sponge dampened with water.
PREPARATION OF THE MASS
In a clean container, pour 30-32% of water and mix with a slow-speed Fuga Pro electric mixer until a uniform paste-like mass is created. Let it rest for 2-3 min and mix again. The prepared product is used for 25-35 minutes.
Technical Data Sheet
Color: Available in 24 colors
Floor plastering: 24 hours
Storage: Stored on pallets
Storage time: 12 months from date of manufacture
Density: 1.2 g/cm3
Amount of water: 1.5-1.7 liters of water per 5 kg
pH: 13
Application temperature: +5°C to +35°C
Working time: 25-35 minutes
Cleaning the joints: After 20 minutes
Violable: After 24 hours
Compressive strength at 28 days: ≥30 N/mm2
Compressive strength after freeze-thaw cycles: ≥21.2 N/mm2
Shrinkage: 2.91 N/mm2
Flexibility (28 days): ≥ 6.8 N/mm2
Water absorption after 30 minutes: ≤ 2g
Water absorption after 240 minutes: ≤ 5g
Flexibility after freeze-thaw cycles: ≥ 5.2N/mm2
Attention! For supports where waterproofing has been applied and large tile formats, the grouting is done 4-5 days after the application of the glue, at the end of the connection to the wall, silicone is applied in the same color as the grout.
English 
Albanian 
Italian 
German 
Arabic