White, cement-based grout for interior walls, ceilings and facades. Suitable for all types of cement-lime-based substrates. Not suitable for application directly on gypsum-based substrates.
FINOCET
It is used on all types of cement-lime and lime-cement bases, etc. Suitable for bases with traditional filling and with pre-prepared mortars. Second coat for leveling ceilings, interior and exterior walls. For bases based on gypsum, concrete or similar, it is recommended to paint beforehand with the special Dekoll primer.
The substrate must be clean and free of dust, oils or residues that could hinder the bonding between the layers. The substrate can be cleaned mechanically or manually. Highly absorbent substrates must be pre-wetted before applying the product.
application
Mix with an electric mixer 6.5-7 liters of water with a 25 kg bag of FINOTEC in a clean container, until a homogeneous mass is achieved and free of lumps. Leave the product to stand for 10 minutes and then mix again before use. Apply the product with a trowel and level it to a thickness of 3mm. After 10-15 minutes, rub the surface with a trowel until the lumps are removed. Atmospheric conditions affect the drying time of the product.
Technical Data Sheet
Appearance: DUST
Packaging: 25 kg paper bag on 1350 kg pallet
Color: White
Consumption: 3.7 kg/m2 (3mm thickness)
Storage:
On wooden pallets
Storage: Store in dry places on dry pallets.
Volumetric measure: 1.5-1.6gr/cm³
Amount of water: : 6.5-7 liters of water per 25 kg of product
How to apply: Two hands
Paint application: 20 days
pH of the mixture: 13
Granulometry: 0.7 mm
Application temperature: +5°C to +35°C
Compressive strength: 2.5 N/mm²
Bending strength: 1.1 N/mm²
Water absorption: WO
Reaction to fire: A1 Class
English 
Albanian 
Italian 
German 
Arabic