Cement-based tile adhesive (C), with improved adhesive strength (2), without vertical slip (T). Classified as C2T adhesive according to standard EN 12004.
INTRACOLL C2T
Suitable for bonding ceramic, stoneware, porcelain tiles, etc. Used for cement-based floors and walls, in both indoor and outdoor environments. Suitable for bonding tiles with dimensions of 5-45 cm.
Mix 6.5-7 liters of clean water with 25 kg of Intrakoll, mix the resulting mass with an electric mixer until a homogeneous mass is formed, free of lumps. Leave it to rest for 10 minutes and then mix again before use. The working time of the mixture is 2-3 hours.
All types of cement-based substrates must be cleaned in advance before applying the product. The substrate may contain impurities such as dust, oils or various residues that negatively affect the application of the adhesive. Cleaning can be done mechanically. Before applying the product, the surface of the substrate must be sprayed with water so that the product creates the best possible adhesion and has the most optimal workability time.
application
Initially, the product is recommended to be applied with the straight part of the trowel to have a more uniform distribution and then with the notched part. The application is done with a suitable trowel depending on the type of tile being laid. The tiles are placed by exerting a slight pressure on the tile, ensuring that the tile is covered over the entire surface with the trowel. Consumption 3-5 kg/m², according to the dimensions of the trowel notches and the type of base.
Technical Data Sheet
Appearance: DUST
Packaging: 25 kg paper bag on 1350 kg pallet
Color: White, Gray
Consumption: 3-5 kg/m²
Storage: Store in dry places on wooden pallets.
Storage Time: 12 months from date of manufacture
Volumetric Measure: 1.6-1.7 g/cm3
Reaction to fire: Class A1
Water for mixing: 6-6.5 liters of water per 25 kg
pH of the mixture: 13
Application temperature: +5°C to +35°C
Correction time: 30 minutes
Filling joints in walls: After 8 to 12 hours
Filling floor joints: After 24 hours
Violable: After 24 hours
Adhesive strength after 28 days: ≥1 N/mm²
FN after immersion in water: ≥1 N/mm²
FN after reaction by heating: ≥1 N/mm²
FN after freeze-thaw cycles: ≥1 N/mm²
FN after 30 min: ≥0.5 N/mm²
Slipperiness: ≤0.5mm
CAUTION! Do not use on: -Wooden, metal, PVC supports or other non-cement based surfaces. -For large and heavy tiles. -For environments with central heating, in environments where there is constant humidity, supports characterized by unstable vibrations. -At high, low temperatures, with strong winds.
English 
Albanian 
Italian 
German 
Arabic