Moisture-resistant patination putty based on gray cement, high-quality marble sand, special synthetic resins and specific additives. Reinforced with fibers. Characterized by excellent workability, very good opening on both horizontal and vertical surfaces. Application of 3 to 5 mm thickness per layer is allowed.
BETHESDA
Used for plastering walls and ceilings on concrete surfaces, for exterior and interior environments. The patination putty should be applied at temperatures from +5°C to +35°C. Ideal for filling and repairing concrete surfaces with small cracks. For repairing and restructuring surfaces damaged during concreting. On concrete surfaces with high porosity.
The base must be clean without dust, oils, paints or residues that become an obstacle to the connection between the layers. The base is cleaned mechanically or manually. If the support has large unevenness, then it must be leveled and a suitable dekoll primer must be applied.
Mix 6–6.5 l of clean water with 20 kg of product, it is recommended to mix the resulting mass with an electric mixer until a homogeneous mass is formed. The resulting mass is left to stand for 5 minutes and it is recommended to mix again before use. Apply the product with a stainless steel trowel and level it. The product is applied in two layers where the maximum thickness per layer reaches 3-5 mm. Atmospheric conditions affect the drying time of the product.
PRODUCT PREPARATION
Mix 6–6.5 l of clean water with 20 kg of product, it is recommended to mix the resulting mass with an electric mixer until a homogeneous mass is formed. The resulting mass is left to stand for 5 minutes and it is recommended to mix again before use. Apply the product with a stainless steel trowel and level it. The product is applied in two layers where the maximum thickness per layer reaches 3-5 mm. Atmospheric conditions affect the drying time of the product.
Technical Data Sheet
Appearance: DUST
Packaging: 20 kg paper bag on 1080 kg pallet
Color: gray
Granulation: < 0.3 mm
Consumption: 1.2 kg/m²/mm
Storage: Store in dry places on wooden pallets.
Storage time: 12 months from date of manufacture
Dry volumetric mass: 1300 kg/m3
Volumetric mass of wet mortar: 1700 kg/m3
Water for mixing: 6 - 6.5 liters/bag
Maximum application thickness per bag: 5mm
Application layers: Two hands
Application temperature: +5°C to +35°C
Waiting time for paint application: Minimum 3 days
Compressive strength: ≥ 15 N/mm²
Adhesion to concrete (28 days): ≥ 1 N/mm²
Reaction to fire: A1 Class
English 
Albanian 
Italian 
German 
Arabic