Fine grey and white second-hand cement-based grout for interior walls, ceilings and facades. Suitable for all types of cement-lime based substrates. Not suitable for laying directly on gypsum based substrates.
DECOFIN
On all types of cement-lime and lime-cement bases, etc. Suitable for bases with traditional filling and with pre-prepared mortars. Second coat for filling ceilings, interior and exterior walls. For bases with gypsum, concrete or similar bases, priming with primer is recommended.
The substrate must be clean and free of dust, oils or residues that could hinder the bonding between the layers. The substrate can be cleaned mechanically or manually. Highly absorbent substrates must be pre-wetted before applying the product.
application
Mix 7-7.5 liters of water with DEKOFIN in a clean container with an electric mixer until a homogeneous, lump-free mass is achieved. Leave the product to stand for 10 minutes and then mix again before use. Apply the product with a trowel and level it to a thickness of 3 mm. After 10-15 minutes, rub the surface with a trowel until the lumps are removed. It is not applicable on gypsum surfaces. Atmospheric conditions affect the drying time of the product.
Technical Data Sheet
Appearance: DUST
Packaging: 25 kg paper bag on 1350 kg pallet
Color: White, Gray
Consumption: 3.7 kg/m2 (3mm thickness)
Storage: On wooden pallets
Storage: 12 months from date of manufacture
Volumetric measure: 1.5-1.6gr/cm³
Amount of water: 7-7.5 liters of water per 25 kg of product
Thickness: 1-2 mm/hand
How to apply: Two hands
Paint application: 20 days
pH of the mixture: 13
Granulometry: 0.7mm
Application temperature: +5°C to +35°C
Compressive strength: 6.6N/mm²
Water absorption: WO
Thermal conductivity: 0.53 λ 10, dry
Reaction to fire: A1 Class
English 
Albanian 
Italian 
German 
Arabic