Decorative silicone topcoat for use on exterior facades and interior surfaces. This product forms a durable structure, resistant to weather conditions such as sunlight and mold formation because it allows vapor permeability. It is a simple product to apply, with very good spreading and adhesion.
SILICONE GRATEX
The support where Gratex Silikon will be applied must first be cleaned of dust as well as residues of oil, wax and adhesive materials. The cleaning of the above is carried out manually. The supports must be flat and mechanically stable. Before applying this product, the support must be flattened and leveled with Ecoliner or Bondex and then painted with Astar Grafiato.
APPLICATION METHOD
The product is mixed until a homogeneous and easily applicable mass is formed. The mixture can be done with a slow-speed electric mixer. Care must be taken that the mixer is completely clean of various pigment residues to avoid any changes in the formed product. The product is applied manually using a trowel and is worked in a horizontal, vertical or circular direction depending on the aesthetic effect you want to achieve. Ready to apply in paste form, white or colored. Available in different granulometry.
Technical Data Sheet
Appearance: Tooth
Packaging: 25 kg plastic bucket
Color: White
Moisture resistance: Good
Application temperature: +5°C to +35°C and lower relative humidity than 80%
Storage: 24 months in original packaging and in a cool place.
Density: 1.85 ± 0.05 kg/l
Combustibility: Non-combustible
pH of the mixture: 8-9
Storage: Store in a place protected from sunlight. Protect from frost.
Drying time: 24 - 48 hours depending on ambient temperature and humidity.
When applying the product, care must be taken to ensure that the ambient temperature is greater than 5⁰C and less than 35⁰C. Direct exposure to sun, rain, wind, and humidity affect the color and quality of the product.
English 
Albanian 
Italian 
German 
Arabic