Cement-based tile adhesive with normal adhesive strength (C1), long working time (E). Characterized by very good workability, good moisture resistance and uniform hardness. Classified as C1E adhesive according to EN 12004 standard.
E-MIX C1E
Suitable for gluing ceramic tiles on cement-based floors in interior environments. Suitable for gluing tiles with dimensions of 5-30 cm. Consumption 3-5kg/m², depending on the dimensions of the trowel notch and the type of base.
Mix 6-6.5 liters of clean water with 25 kg of E-Mix, mix the resulting mass with an electric mixer until a homogeneous mass is formed without lumps. Leave it to rest for 10 minutes and then mix again before use. The working time of the mixture is 2-3 hours.
All types of cement-based substrates must be cleaned in advance before applying the product. The substrate may contain impurities such as dust, oils or various residues that negatively affect the strength of the adhesive. Cleaning can be done mechanically with a vacuum cleaner, etc.
Application
Initially, it is recommended to apply the product with the straight part of the trowel to achieve the most even distribution and then with the serrated part. The tiles are placed by exerting a slight pressure on the tile, ensuring that the entire surface of the tile is covered with the trowel.
Technical Data Sheet
Appearance: DUST
Packaging: 25 kg paper bag on 1350 kg pallet
Color: White, Gray
Consumption: 3-5 kg/m2
Storage: Store in dry places on wooden pallets.
Storage Time: 12 months from date of manufacture
Volumetric Measure: 1.6-1.7 g/cm3
Reaction to fire: Class A1
Water for mixing: 6-6.5 liters of water per 25 kg
pH of the mixture: 13
Application temperature: +5°C to 35°C
Correction time: 30 minutes
Filling joints in walls: After 8 to 12 hours
Filling floor joints: After 24 hours
Violable: After 24 hours
Adhesive strength after 28 days: ≥0.5 N/mm2
FN after immersion in water: ≥0.5 N/mm2
FN after reaction by heating: ≥0.5 N/mm2
FN after freeze-thaw cycles: ≥0.5 N/mm2
FN after 20 min: ≥0.5 N/mm2
CAUTION! Do not use on: -Wooden, metal, PVC supports or other non-cement based surfaces. -For large and heavy tiles. -For environments with central heating, in environments where there is constant humidity, supports characterized by unstable vibrations. -At high, low temperatures, with strong winds.
English 
Albanian 
Italian 
German 
Arabic