Dekoll / Dekoll sh.pk / Products / Grout / FUGA 2+
Dekoll / Dekoll sh.pk / Products / Grout / FUGA 2+

FUGA 2+

Two-component joint filler, with improved resistance. Component A (2Kg) consists of cement-based powder material, marble sand with selected granulometry, synthetic resins and hydrophobic agents.
Component B (200 g) consists of acrylic resin which gives the final product the highest flexibility, improved resistance and maximum protection against abrasive agents and detergents.
Suitable for filling joints from 2-8 mm. Classified as a CG2WA product according to the EN standard

It is characterized by very easy workability and cleaning, and very good adhesion.

Suitable for filling joints from 2-8 mm.
The joints to be grouted must be clean, free of tile adhesive or mortar throughout the entire thickness. Application on wet substrates is not recommended.
First, mix component B (200g) with 400-500 ml of water, to this mixture we add the contents of component A (2kg). Mixing is done with an electric mixer until you achieve a homogeneous mass without grains.
Download PDF

Application

Apply the product to the joints with a rubber spatula or with a trowel. After 20 minutes when the product has
Once it has become stable, the remaining part is cleaned with a sponge transversely to the direction of the joints.

Technical Data Sheet
Appearance: Component A (powder), Component B (liquid)
Packaging: 2kg bag and 200g can packaged in 2kg bucket
Color: Available in 26 colors
Storage: Store in dry places on wooden pallets.
Storage time: 12 months from date of manufacture
Volumetric Measure: 1.5 g/cm3
Water for mixing: 1.2-1.6 liters of water per 5 kg
pH of the mixture: 12
Application temperature: +5°C to +35°C
Working time: 1 hour
Filling floor joints: After 24 hours
Violable: After 24 hours
Compressive strength at 28 days: 15N/mm²
Flexural strength at 28 days: ≥ 2 N/mm²
Resistant to: Acids, Bases and Salts
Attention! For supports where waterproofing has been applied and large tile formats, the grouting is done 4-5 days after the application of the glue, at the end of the connection to the wall, silicone is applied in the same color as the grout.

Similar Products

Thermal Insulation System

PREMIX

View Product
Tile Laying
Hydrolysis System

ALTAKOLL C2TES1

View Product
Tile Laying
Hydrolysis System

MAXIKOLL C2T

View Product
Tile Laying
Hydrolysis System

PRO FUGA

View Product

Dekoll shpk is the leading company in the Albanian market and not only in providing prefabricated construction products. At Dekoll you will find all the necessary materials such as: plaster, grafiato, filler, self-leveling, filling plaster, products for waterproofing systems, thermal insulation and everything else.

Dekoll
About Us
Our Mission
Our Values
PROJECTS
Our Products
Self-leveling
Grout
Waterproofing
Plaster Wall
Tile Adhesive
Refined
Filling Plaster
Thermoinsulation
Contact Us
(+355) 44 500 376 (+355) 69 808 0122 info@dekoll.al
Privacy Policy
Terms of Use
Web design Powered By Dekoll
en_USEnglish
sqAlbanian it_ITItalian de_DEGerman arArabic en_USEnglish