Flexible two-component waterproofing material, based on cement, sand with selected granulometry, water-repellent additive and flexible resin. It has excellent workability, very good adhesion capabilities. Suitable for all types of cement-based foundations such as: concrete and treated walls. After hardening, it creates a flexible and waterproof layer. For outdoor and indoor environments.
Decolastic ECO
Waterproofing for bathrooms, showers, balconies, basements. Waterproofing before laying tiles Before laying tiles, it is necessary that the product has reached its 5-7 day maturation period.
Pour the liquid component B (8KG) into a clean container and while mixing add the dry component A (24KG). Mix with a mechanical mixer until a homogeneous mass is achieved, without lumps and without air bubbles. Workability time of the mixture 30 min.
Apply the product in two coats with a brush or spatula, applying about 2mm for each coat. The second coat is applied after a period of 4-6 hours between each other and not before the first coat has dried. The product is used only by combining component A with component B and in the recommended quantity. Apply the product at temperatures from +5°C to +35°C.
SUPPORT PREPARATION
Cement-based substrates must be stable, resistant and regular, free of oil, dirt and paint residues and must have reached the required curing time. Approximately traditional cement-based floors with normal hardening time must have a curing time of at least 28 days, traditional plaster bases must dry for at least 14 days. Large unevenness or large cracks must be repaired in advance. All types of substrates must be mechanically cleaned before applying the product. A 10 cm waterproofing strip must be placed in all corners between the wall and the floor, technical joints and drainage joints.
Technical Data Sheet
Appearance (Component A):DUST
Packaging (Component A):Paper bag 24 kg in pallet 1296
Color (Component A):gray
Consumption (Component A):1.65 kg/mm thickness
Storage (Component A):Store in dry places on wooden pallets.
Storage Time (Component A):12 months from date of manufacture
pH of the mixture (Component A):>12
Volumetric Weight (Component A):1.4 g/cm3
Appearance (Component B):juice
Packaging (Component B):8 Kg Can
Color (Component B): White
Storage (Component B):24 months
Volumetric Measure (Component B):1.1 g/cm3
Caution! Do not mix any other product with DEKOLASTIK EKO and to apply the second coat you must ensure that the first coat is completely dry. Empty cans should not be used for drinking water. Do not apply on bituminous waterproofing. Avoid application on hot or windy days, on frosty and thawing substrates. Make sure that the substrate is completely dry to perform tiling or painting with elastic paint. During the summer period, it is recommended to use acrylic primer diluted 1 to 2 with water.
English 
Albanian 
Italian 
German 
Arabic