Silicone is a one-component, acetic-based material that cures at room temperature when exposed to atmospheric moisture. It forms a Ťexible and durable silicone rubber. Speciţcally designed for bonding and sealing, it is waterproof and suitable for a wide range of non-porous surfaces. Available in 4 colors: Transparent, White, Gray, and Beige.
DECOSIL
-Very easy to apply and smooth out
- Resistant to mold, UV rays, moisture, and weather conditions
- Fast drying
- Does not slip, stays in joints and corners
- Permanently elastic
- Resistant to mold, UV rays, moisture, and weather conditions
- Fast drying
- Does not slip, stays in joints and corners
- Permanently elastic
-Insulation and siliconization of stars in indoor and outdoor environments
-Insulation and silicone in sinks, bathtubs, showers, swimming pools
-Insulation for water pipes, drains and PVC pipes -Glass
-Insulation and siliconization for ceramic tiles
-Glass coated surfaces
-Fiberglass surface
-Siliconization of anodized aluminum surfaces
-Insulation and silicone in sinks, bathtubs, showers, swimming pools
-Insulation for water pipes, drains and PVC pipes -Glass
-Insulation and siliconization for ceramic tiles
-Glass coated surfaces
-Fiberglass surface
-Siliconization of anodized aluminum surfaces
Surfaces must be dry, free from dust, loose particles and oil. In areas where there is dirt, they should be cleaned with solvent and a clean cotton cloth. Excess solvent must be removed before it evaporates. Application temperature: +5 °C to +40 °C.
Application
Standard tube: Cut off the threaded tip of the tube and insert the application tube. Insert the tube into the silicone gun and press the handle to fill the nozzle with silicone. After application, smooth the surface with a suitable tool (e.g. spatula). Remove excess residue. The surface where the silicone is applied must be protected from various dirt and mechanical loads until it hardens. In wide or movable joints, use auxiliary materials such as a support tube to maintain the correct shape and thickness. Ensure good ventilation during and after application.
Technical Data Sheet
Density0.96 g/ml
Packaging:280 ml
Color:Transparent, White, Grey, Beige
Touch drying time:8-15 minutes
Skin formation time:20-30 minutes
Hardness level:1.8 – 2.0 mm/24h
Volume Loss (ISO 10563):<30 %
Resistance to sagging (ISO 7390):0 mm
Microbial growth rate (ISO 846):1
Service temperature:-40 to +100 °C
Application temperature:+ 5°C to + 40°C
Shore A hardness (ISO 868):13 – 14
100% Elastic modulus (ISO 37):0.21 – 0.23 N/mm²
Tensile strength (ISO 37):1.1 – 1.4 N/mm²
Storage:12 months from the production date
KUJDES! Nuk përdoret mbi sipërfaqe bituminoze ose materiale që mund të lëshojnë vajra/plastifikue (p.sh. goma natyrale, etj.
-Corrosive to bare metals
-Poor adhesion with very porous surfaces
-Does not stick to polyethylene, polypropylene, Teflon
-Not recommended for natural stones
Always perform a preliminary test for compatibility and adhesion. If necessary, use primer to improve adhesion. Respect the expiration date.
-Corrosive to bare metals
-Poor adhesion with very porous surfaces
-Does not stick to polyethylene, polypropylene, Teflon
-Not recommended for natural stones
Always perform a preliminary test for compatibility and adhesion. If necessary, use primer to improve adhesion. Respect the expiration date.
English 
Albanian 
Italian 
German 
Arabic