DEKOCEMENT is a cement-based decorative product with polymer additives and additives, without corrosive components, suitable for use in indoor and outdoor environments. This product bonds very well to the support, providing a strong, smooth and aesthetically beautiful surface.
Decocement
It is used as a final layer that must be treated with protective varnish on stairs, floors, walls and for special structures such as bathroom walls, exterior columns, etc.
The product can be applied on two supports: 1. On polished concrete where previously primed with acrylic primer and DECOCEMENT is applied after the primer has dried. 2. On cardboard where previously primed with acrylic primer, leveled with bondex, after 24 hours re-primed and DECOCEMENT is applied.
•S 2 Keep out of reach of children
•S 28 In case of contact with skin, wash immediately with soap and water or a suitable cleanser.
•S 26 In case of contact with eyes, rinse immediately with plenty of water and, if necessary, consult a doctor.
•S 62 If swallowed, seek medical advice immediately and show the product packaging.
•S 7 Close tightly after application.
•S 3/14 Store in cool places.
•S 51 The workplace must be well ventilated.
•S 36/37 Wear protective clothing and gloves during work.
•S 28 In case of contact with skin, wash immediately with soap and water or a suitable cleanser.
•S 26 In case of contact with eyes, rinse immediately with plenty of water and, if necessary, consult a doctor.
•S 62 If swallowed, seek medical advice immediately and show the product packaging.
•S 7 Close tightly after application.
•S 3/14 Store in cool places.
•S 51 The workplace must be well ventilated.
•S 36/37 Wear protective clothing and gloves during work.
PREPARATION OF THE MIXTURE
1 kg of DECOCEMENT is dissolved in 24% of water until a uniform mixture is created. The product is applied using a smooth screed in a thickness of 1-3 mm, in one or two layers. After drying, it can be rubbed with sandpaper depending on how smooth the surface is required to be. 2-3 days after completing the application, and provided that the surface is dry, protective varnishes can be applied.
Technical Data Sheet
Appearance:Gray Powder
Composition:Cement, selected inerts, resins, additives.
Granulometry:0.07 mm
Density of dry mortar:1.32 kg/l
Packaging:25 kg paper bags in 1350 kg pallets
Application and substrate temperature: + 5°C to + 35°C
Thickness:From 1 to 3 mm / layer
Preparation water:24%.
Pot life in bucket:90 minutes.
Compressive strength: 30 N/mm2.
Consumption:1.6 kg/m² /mm thickness.
Bending resistance:≥ 6.0 N/mm2.
English 
Albanian 
Italian 
German 
Arabic