It is a water-based acrylic primer for walls. It has high surface penetration, thus ensuring strong adhesion. It is odorless, user-friendly and environmentally friendly and for these reasons it is recommended for priming interior and exterior surfaces. It is suitable for the preparation of new surfaces to be painted with plastic or acrylic paints such as plaster, concrete, brick, as well as for porous surfaces with high absorption such as: silicate bricks at a dilution of 1/3 and supports with the presence of dust on which the two-component waterproofing will be applied. It bonds and insulates porous surfaces painted with lime, hydromat, low-quality paints, ensuring a perfect bond and application and increasing the yield of the final paint.
Astar Akrilik Pinto
The surface must be clean of dust, oils, old, peeling paint, mold and moisture. A coat of ACRYLIC PRIMER with the appropriate dilution is used and any type of plastic or acrylic paint can be used as a final paint over this primer.
•S 2 Keep out of reach of children
•S 28 In case of contact with skin, wash immediately with soap and water or a suitable cleanser.
•S 26 In case of contact with eyes, rinse immediately with plenty of water and, if necessary, consult a doctor.
•S 62 If swallowed, seek medical advice immediately and show the product packaging.
•S 7 Close tightly after application.
•S 3/14 Store in cool places.
•S 51 The workplace must be well ventilated.
•S 36/37 Wear protective clothing and gloves during work.
•S 28 In case of contact with skin, wash immediately with soap and water or a suitable cleanser.
•S 26 In case of contact with eyes, rinse immediately with plenty of water and, if necessary, consult a doctor.
•S 62 If swallowed, seek medical advice immediately and show the product packaging.
•S 7 Close tightly after application.
•S 3/14 Store in cool places.
•S 51 The workplace must be well ventilated.
•S 36/37 Wear protective clothing and gloves during work.
AFTER USE
Dilute the paint 10 – 15% with clean water and mix well before use. Apply 2 coats of Pinto ANTI-MOULD for a perfect result. Ensure good ventilation during application and drying. Apply the paint and let it dry at temperatures between 5°C – 35°C.
Technical Data Sheet
Type: 1
Application method:Brush, roller or spray gun
Dilution: 50%-100% with clean water, this ratio depends on the permeability of the surface. For surfaces with high permeability, dilute the primer up to 50% with clean water.
Coverage rate: 15-20 m2/lt, this depends on the permeability of the surface
Drying time:It dries after 1-3 hours and can be repainted after 3-5 hours. The time depends on weather conditions (temperature and humidity).
Application temperature:5 - 35°C and relative humidity up to 80%.
Storage:Store in a place protected from sunlight. Protect from frost.
Storage:24 months in original packaging in a dry place.
Packaging:
4L, 9L, 18L
English 
Albanian 
Italian 
German 
Arabic