Cement-based powder product for sealing joints, composed of high-quality marble sand with selected granulometry, special synthetic resins and hydrophobic agents. Resistant to moisture and abrasion. Suitable for filling joints from 2-15mm. Classified as a CG2 product according to the EN 13888 standard. Characterized by very good workability, very easy cleaning, good adhesion, high resistance to sunlight and atmospheric agents, resistant to corrosive agents, acids and various bases.




DEFUGATION
Defuga is used for grouting ceramic tiles, porcelain stoneware, mosaic tiles for indoor environments. It is not recommended for filling joints in widths greater than the permitted one. In case of applications for areas exposed to high traffic or under the influence of chemicals, we recommend that the product be reinforced with FUGALASTIC deKoll.
The joints to be grouted must be clean, free of tile adhesive or mortar throughout the entire thickness. Application on wet substrates is not recommended.
Mix 1.2-1.6 liters of water with 5 kg of powdered product in a clean container with an electric mixer until you achieve a homogeneous and lump-free mass. It should be noted that the material of the mixture for filling joints on the floor becomes more watery than for joints on the walls.
application
Apply the product to the joints with a rubber spatula or with a trowel. After 20 minutes when the product has
Once it has become stable, the remaining part is cleaned with a sponge transversely to the direction of the joints.






Technical Data Sheet
Appearance: DUST
Packaging: 2 kg bags in boxes of 16 kg on a pallet of 576 kg (36 boxes) and 5 kg in boxes of 20 kg on a pallet of 720 kg (36 boxes)
Color: Available in 26 colors
Storage: Store in dry places on wooden pallets.
Storage time: 12 months from date of manufacture
Volumetric Measure: 1.4 g/cm3
Water for mixing: 1.2-1.6 liters of water per 5 kg
pH of the mixture: 13
Application temperature: +5°C to +35°C
Working time: 2 hours
Filling joints in walls: After 4-8 hours
Filling floor joints: After 24 hours
Cleaning the joints: After 20 minutes
Violable: After 24 hours
Compressive strength at 28 days: 15N/mm²
Flexural strength at 28 days: ≥ 2.7 N/mm²

